Ana sayfa Ürünler Düşük çekiç çarpma test makinesi

Drop Hammer Impact Testing Machine Offering Both Manual and Automatic Working Modes for Flexible Material Impact Testing

Tüm ürünler

UTM Evrensel Test Makinesi (16)

Hidrolik Üniversal Test Cihazı (19)

Hidrostatik Basınç Test Cihazı (41)

Plastik borular için bitiş kapağı (55)

Düşük çekiç çarpma test makinesi (22)

Erime Akış Endeksi (10)

hdt vicat test cihazı (26)

Izod Charpy Etki Test Cihazı (10)

örnek yapma makinesi (7)

Sıvı Yüzey Arayüzü Gerilim Ölçer (10)

Diferansiyel Taramalı Kalorimetre (13)

Yanıcılık deneme ekipmanları (8)

Müşteri yorumları

Hidrostatik basınç test makinesi ürünleri için yardımınız için teşekkürler

—— Grupo Latyn

Sizinle çalışmak bir zevkti ve şirketlerimiz arasındaki işbirliklere verdiğiniz çabayı çok takdir ediyorum.

—— Petra Plastic Industries LLC

Ben sohbet şimdi

Drop Hammer Impact Testing Machine Offering Both Manual and Automatic Working Modes for Flexible Material Impact Testing

Büyük resim : Drop Hammer Impact Testing Machine Offering Both Manual and Automatic Working Modes for Flexible Material Impact Testing

Ürün ayrıntıları:

Menşe yeri:	Pekin, Çin
Marka adı:	TH
Sertifika:	ISO9001, CE
Model numarası:	XJL-300B

Ödeme & teslimat koşulları:

Min sipariş miktarı:	1 Takım
Ambalaj bilgileri:	Standart ihracat tahta sandık
Teslim süresi:	10~15 iş günü
Ödeme koşulları:	T/T,L/C,D/A,D/P,Western Union,MoneyGram
Yetenek temini:	Açma/Kapama, tek kademeli, mikro anahtar

İletişim

Detaylı ürün tanımı

Ürün adı:	Esnek Malzeme Darbe Testi için Hem Manuel hem de Otomatik Çalışma Modları Sunan Düşürme Çekiç Darbe	Çalışma Masasının Gezintisi:	0-630mm
Numune Çapı:	φ10~630mm	Çekiç Çapı:	D25, D90, R5, R10, R30, R50 isteğe bağlı olabilir
Çekiç Ağırlığı:	0,250~16,000kg 0,125kg/ artış	Max. Maks. Impact Height Darbe Yüksekliği:	2000mm
Vurgulamak:	manual drop hammer impact tester , automatic drop hammer testing machine , flexible material impact testing equipment

Drop Hammer Impact Testing Machine

Professional testing instrument offering both manual and automatic working modes for flexible material impact testing of non-metallic materials.

Application

The Drop-hammer testing machine is specifically engineered for impact performance testing of non-metallic material products. This professional testing instrument evaluates impact resistance of non-metallic materials, providing reliable basis for assessing and verifying material quality. Both standard test method and gradient test method are applicable, enabling flexible adaptation to diverse testing requirements.

Key Features

Dual manual and automatic operation modes for convenient, simple operation
Single-chip microcomputer control system with automatic hammer clamping, lifting, height calibration and real-time display
Automatic zero-line calibration for test samples ensuring accurate positioning
Secondary impact prevention device avoids interference from redundant impacts
Integrated automatic protection and real-time prompt functions enhance safety
Electric adjustment capability in lower space improves positioning accuracy and reduces operator labor

Structure & Working Principle

The testing machine consists of workbench, anti-secondary impact mechanism, support tube, guide tube, hammer body, V-shaped anvil, automatic drop hammer mechanism, reducer, electric control cabinet and main frame.

Working principle: A hammer clamping assembly inside the guide tube lifts the hammer body automatically to preset height via motor and reducer. The release switch actuates to allow free fall along the guide tube, impacting the test specimen. Impact energy is calculated based on hammer mass and drop height.

After specimen impact, the anti-secondary impact mechanism controlled by photoelectric signal quickly locks rebounding hammer body to prevent repeated impact.

V-shaped anvil fitting below workbench features lead screws on both sides, with handwheel-driven lifting and lowering mechanism.

Executive Standards

ZB N72 026, GB/T14152, 14153, 100021, 13664, 58361, 18847, 16800, 8814, GB/T 6112, ABN72026, ISO 4422, ISO 3127, ASTM D2444

Technical Parameters

Parameter	Specification
Model	XJL-300B
Max. Impact Energy	300J
Max. Height	2000mm
Drop Weight	0.25-16kg
Impact Center Error	2mm
Hammer Head	R5mm, R10mm, R30mm (customizable)
Customer Requirements	d25, d90
Table Travel	0mm-630mm
Specimen Diameter	10mm~630mm
Pallet Type	120°V-type with/without support, clamp flat pallet
Power	AC220V 50Hz

Standard Configuration

No.	Name	Unit	Quantity	Remarks
1	Host	set	1
2	Electric Cabinet	set	1
3	Weight Set	pieces	11	0.1kg, 0.125kg (x2), 0.2kg, 0.25kg, 0.5kg, 1.0kg (x2), 2kg, 3kg, 6kg
4	Impact Hammer	sets	2	0.5kg & 1.0kg sets with trays and joints
5	Hammer Head	sets	2	D25 & D90
6	Double Sides V Iron	set	1
7	One Sided V Iron	set	1	Installed on main machine
8	Documentation	copies	3	Operating instruction, Packing list, Certificate of approval