Hydrostatic Pressure Testing Machine
The Hydrostatic Pressure Testing Machine is used for the determination of the resistance to internal pressure of thermoplastic pipes.
Purposes
The main function of hydrostatic pressure testing machines is to evaluate the internal pressure resistance of plastic pipes, fittings, and assemblies. By applying a specific internal pressure to products made from materials like PP, PE, PVC, PVC-C, and ABS under controlled conditions for a set period, the machine assesses their pressure-bearing capacity without failure (e.g., leakage, bursting, or excessive deformation). This testing is vital for ensuring the quality, safety, and reliability of plastic pipes and related components in fluid conveyance systems, which are widely used in water supply, drainage, gas transmission, and industrial fluid transfer fields.
Meet Standards
ISO1167-2006, ASTMD1598-2004, ASTMD1599, ISO9080, CJ/T108, ASTMF1335.
Frequently Asked Questions
Q1: What is the purpose of the Hydrostatic Testing Machine (Plastic Pipe Hydrostatic Pressure Testing Machine)?
A1: It is used to test the hydrostatic pressure resistance and bursting strength of plastic pipes.
Q2: What types of components and materials can the Hydrostatic Pressure Testing Machine test?
A2: The machine can test plastic pipes and composite pipes (such as PP-R, PP-B, PP-A, PVC, PE, PE-X, etc.).
Q3: What is the maximum pressure that the Hydrostatic Pressure Testing Machine can test?
A3: The machine can test pressures up to 10 MPa, 100 bar (14,500 psi).
Technical Parameters
| Model |
XGY-10C |
| Diameter range |
Φ8-1800mm |
| Stations |
3, 5, 6, 12, 15, 18, 20, 25, 50, 100 etc can customized |
| Control mode |
Micro-control, industrial PC control |
| Display mode |
Industrial PC LCD color display |
| Storage mode |
PC storage |
| Print mode |
Color printer output |
| Test pressure |
Pressure range: 0.1-10MPa |
| Control accuracy |
±1% |
| Display resolution |
0.01MPa |
| Working range |
5%~100%FS |
| Indication error |
±1% |
| Test Timer |
Timer range: 0~10000h |
| Timer accuracy |
±0.1% |
| Timer resolution |
1s |
| Power |
380V 50Hz three-phase four-wire 1.5KW |
| End caps models |
from Φ8 to 1800mm |
| Water tank size |
accoard to the pipe size |
| Temperature range |
15-95℃ |
| Dimensions (three stations) |
715×625×1700(mm)or others |
The Free Length of the Specimens
| Specimen Type |
Free Length Requirements |
| Extruded Pipe Specimens |
dn <315mm: ≥ 3dn and ≥ 250mm; dn >315mm: ≥ 2dn |
| Injection-molded Pipe Specimens |
dn <50mm: 3dn; 50mm ≤ dn ≤ 110mm: ≥ 140mm |
| Assembled Specimens with Hydrostatic Thrust (Two Pipe Sections) |
≥ 3dn and ≥ 250mm (dn >315mm: ≥ 2dn if min. length not met) |
| Assembled Specimens with Hydrostatic Thrust (with Fittings) |
≥ 2dn and ≥ 150mm; dn >250mm: ≥ 1.5dn |
| Assembled Specimens with Hydrostatic Thrust (Saddle Branch) |
≥ 100mm |
| Assembled Specimens without Hydrostatic Thrust |
= dn and ≥ 150mm |
Uw bericht moet tussen de 20-3.000 tekens bevatten!
